Page 1 of 1

ClockTuner for Ryzen

Posted: 2020-10-17 23:01
by Crunk
Ar bandėt kas naudoti šį toolsą ? kaip rezultatai ?
https://www.techpowerup.com/273437/cloc ... 1-released

Re: ClockTuner for Ryzen

Posted: 2020-10-18 00:56
by vycius9
gavau bronzą
ctr1.1.png
ctr1.1.png (132.76 KiB) Viewed 17992 times

Re: ClockTuner for Ryzen

Posted: 2020-10-20 08:07
by Elsis
Gold :D
Image

Re: ClockTuner for Ryzen

Posted: 2020-10-20 20:15
by darijan
Silver
Image

Re: ClockTuner for Ryzen

Posted: 2020-10-21 10:45
by nemesis
Štai ir turim visą medalių komplektą.
Idomu kiek pagreitėjo tie procai procentaliai, kiek voltage pakilo/nukrito nuo stock ir t.t. Dar idomu ar labai skiriasi rezultatai nuo to, kas pats pasipimpinęs buvo...

Re: ClockTuner for Ryzen

Posted: 2020-10-24 19:14
by darijan
nemesis wrote:
2020-10-21 10:45
Štai ir turim visą medalių komplektą.
Idomu kiek pagreitėjo tie procai procentaliai, kiek voltage pakilo/nukrito nuo stock ir t.t. Dar idomu ar labai skiriasi rezultatai nuo to, kas pats pasipimpinęs buvo...
3700x silver
Stock speed - Cinebench r20 4550+-

Pagal recommended undervolt 4100 MHz 1175mV - Cinebench r20 4880+-
Pagal auto overclocking 4225 MHz 1250mV - Cinebench r20 4970+-

Re: ClockTuner for Ryzen

Posted: 2020-10-25 20:43
by BC00
darijan wrote:
2020-10-24 19:14
nemesis wrote:
2020-10-21 10:45
Štai ir turim visą medalių komplektą.
Idomu kiek pagreitėjo tie procai procentaliai, kiek voltage pakilo/nukrito nuo stock ir t.t. Dar idomu ar labai skiriasi rezultatai nuo to, kas pats pasipimpinęs buvo...
3700x silver
Stock speed - Cinebench r20 4550+-

Pagal recommended undervolt 4100 MHz 1175mV - Cinebench r20 4880+-
Pagal auto overclocking 4225 MHz 1250mV - Cinebench r20 4970+-
Kažkaip mažoka stockiniam 3700X tie 4550 taškų...

Re: ClockTuner for Ryzen

Posted: 2021-05-28 00:03
by slaptasBotas
Sveiki,
Gal kas galite paaiškinti kaip su 2.1 versija undervolting daryti? Turiu rezultatus po Diagnostic:

Code: Select all

DIAGNOSTIC RESULTS
AMD Ryzen 5 3600 6-Core Processor
CPU VID: 1132
CPU TEL: 1115
Max temperature: 71,2°
Energy efficient: 3,63
Your CPU is SILVER SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4200 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1350 mV
Reference frequency: 4350 MHz
Recomended values for undervolting:
Reference voltage: 1175 mV
Reference frequency: 4050 MHz
Tai man į P1 ir į P2 profilius įrašyti 1175 voltažą ir 4050 MHz dažnį per CCX1 ir CCX2? Ar undervolting reikšmes įrašyti tik į P1?

Re: ClockTuner for Ryzen

Posted: 2021-05-28 17:06
by BC00
Senesnė versija, bet paskutinė pastraipa turėtų atsakyti į klausimą.

http://www.technews.lt/portal/reviews/v ... r-50-tr/9/

Re: ClockTuner for Ryzen

Posted: 2021-06-04 16:29
by cFos
Undervolt automatiškai užpildė į profile2 ir kaip suprantu aktyvuoja nuo 81proc apkrovos... Gal vertėtų tą ribą sumažinti? Ar palikt kaip rekomenduoja softas

Re: ClockTuner for Ryzen

Posted: 2021-06-04 22:14
by BC00
cFos wrote:
2021-06-04 16:29
Undervolt automatiškai užpildė į profile2 ir kaip suprantu aktyvuoja nuo 81proc apkrovos... Gal vertėtų tą ribą sumažinti? Ar palikt kaip rekomenduoja softas
Kodėl nuo 81 %?

Re: ClockTuner for Ryzen

Posted: 2021-06-05 10:51
by cFos
https://i.ibb.co/b6Sfbxs/Screenshot-202 ... 104900.png

Leidžia keist tą 81, bet pagal default 81 stovi

Re: ClockTuner for Ryzen

Posted: 2021-06-05 18:54
by BC00
cFos wrote:
2021-06-05 10:51
https://i.ibb.co/b6Sfbxs/Screenshot-202 ... 104900.png

Leidžia keist tą 81, bet pagal default 81 stovi
Manau, čia nebus tas bendras CPU usage, o būtent nuo CCX. Pats turi leisti įvairius workload'us ir sekti kiek apkrovos reikia, kad profiliai persijungtų.
Hybrid OC mode aims to maximize performance in all scenarios and even in single-threaded(!) applications. This mode has 3 profiles. P1 profile is for heavy tasks that use all cores. In fact, this is what was in CTR 1.1. To profile P1 was added profile P2, which is activated only in situations when one or more CCX have partial load within CCX usage min and CCX usage max. I conditionally call it "gaming" because it will be useful for applications that use 4-5-6 threads (it all depends on what settings the user will use). The peculiarity of this profile is a frequency that exceeds factory frequency and at the same time, the power consumption of the processor doesn't exceed factory one. Another advantage of this profile is a fixed core frequency; the user gets maximum performance, which is not affected by several factors such as temperature, spontaneous voltage sags (caused by starters), or type of instructions executed (recall that everything is within the jurisdiction of load comparable with AVX Light).

The P0 profile is also the standard CPU boost. If processor load is lower than CCX usage, min profile P1 or P2 will be deactivated to give maximum power saving or maximum single-threaded performance. If CCX usage min is equal to 0 - the processor will never switch to the P0 state.